|
|
|
Who's Online
There currently are 5561 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Thank´s for your help, I already recived these manual from you
;
Thank you for your manual It has the basic things to and i use the Oszi for Longer Time.
THX
;
Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
 ;
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
;
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
FUEL HANDLING
Fuel
When the oil level is low, top up using engine oil to the edge of the oil re�ll hole.
CAUTION! The machine is equipped with a four-stroke engine. Make sure that there is always suf�cient oil in the oil tank. WARNING! Always ensure there is adequate ventilation when handling fuel. The catalytic converter muf�er gets very hot during and after use. This also applies during idling. Be aware of the �re hazard, especially when working near �ammable substances and/or vapours.
!
Only use recommended engine oil.
Fuelling
Petrol
!
� � Use high-grade unleaded petrol of at least 86 octane. If the machine is not used for some time the fuel tank should be emptied and cleaned.
WARNING! Taking the following precautions, will lessen the risk of �re: Do not smoke or place hot objects near fuel. Always shut off the engine before refuelling. When refuelling, open the fuel cap slowly so that any excess pressure is released gently. Tighten the fuel cap carefully after refuelling. Always move the machine away from the refuelling area before starting.
Engine oil
Check the oil level before starting the machine. A too low oil level can cause serious damage to the engine. When the machine is new the engine oil should be changed after the �rst month or after 10 hours of operation. � � For the best result and function use HUSQVARNA engin oil. When HUSQVARNA engine oil is not available another high grade engine oil can be used. Contact your dealer when selecting oil. Mineral oil or semisynthetic oil should be used. In general SAE 10W-40 is recommended. Never use oil intended for two-stroke engines.
Clean around the fuel cap. Clean the fuel and oil tank regularly. The fuel �lter should be changed at least once a year. Contamination in the tanks causes malfunction. Always move the machine about 3 metres from the refuelling position before starting.
�
Oil level
The machine must be switched off and placed on a �at surface when you check the oil level. Unscrew the oil cap, clean the dipstick located on the cap and insert the cap again without screwing it down. Check the oil level on the dipstick.
English
� 13
|
|
|
> |
|
