|
|
|
Who's Online
There currently are 5115 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual was made available promptly. I is a clean scan of the original. I had no problem downloading it. The scan was well centered and cleanly formatted. It is as good a product as can be had without being the original document.
 ;
Received downlink in less then 8 hours, Item was in good copy condition, and told me how to program the clock timer. The price was very resonable, and the process was very automated and was GREAT to work with.
;
Fast service, document is OK. Thanks! Searched for it long time.
;
I was very pleased with the manual I got for my amateur (ham) radio. Without it I could not figure out how to input and/or change the P/L setting on my radio. It drove me nuts as the radio was essentially useless. That all changed when my manual came. Then it took only minutes and I was done. Now my radio works fine. This is an exceptionally good resource as it's a very easy and user friendly download. Thank you very much! Dziękujemy za!
;
It answered my question, which was how to load the paper. I did notice that the very end of the manual was not visible.
MAINTENANCE
Adjusting the throttle cable
Only applies to model AR25. 1. 2. Start the engine and allow it to reach operating temperature. Adjust the throttle cable at the adjustable mounting (the left in the illustration) by turning the adjustment nut. The tighter the setting, the higher the engine speed. Undoing the nut reduces engine speed. IMPORTANT INFORMATION If the throttle is properly adjusted, engine speed increases somewhat when the clutch is released. � If the clutch is released too early, the engine stalls. � If engine speed is too high, you lose your ability to start moving gradually and under control.
8011-163
Replacing the throttle cable
Only applies to model AR25. 1. Measure the length of the cable that extends past the cable screw before disconnecting the cable. Remove the old throttle cable and insert a new one through the guide hole on the back of the cowling. Insert the new cable through the cable screw the same distance as the old one (see step 1) and tighten the screw. This measurement is only approximate and may require adjustment. See the section above �Adjusting the throttle cable� to adjust the throttle settings. Fit the new adjustable mounting (see the lower illustration) on the spring on the throttle/clutch.
2.
3.
8011-250
4.
IMPORTANT INFORMATION As the cable length increases between the cable screw and the adjustment nut, the engine speed decreases. If engine speed is too low, the engine will stall when the clutch is released. As the cable length decreases between the cable screw and the adjustment nut, the engine speed increases. If engine speed is too high, you lose your ability to start moving under control.
8011-118
English � 27
|
|
|
> |
|
