A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
Text excerpt from page 9 (click to view)
WORKING TECHNIQUES
� Always wear heavy-duty gloves when repairing the cutting attachment. This is extremely sharp and can easily cause cuts. 2 Press the cutting unit against the hedge or some other �rm surface until the required angle is set.
� �
Store the machine out of reach of children. Use only original spare parts for repairs. 3 Tighten the knob.
Basic working techniques
� Work with a swinging action from the bottom upwards when trimming sides.
(HA 850)
� Undo the knob.
� � �
Adjust the throttle setting to suit the load. When trimming a hedge the engine should always face away from the hedge. Hold the machine as close to your body as possible to get the best balance. � Adjust the angle with the help of the handle on the cutting unit.
� � � Make sure that the tip does not touch the ground. Do not rush the work, but work steadily until all the branches have been cut back cleanly.
Tighten the knob.
Changing the hedge trimmer angle
(HA 110)
1 Undo the knob.
!
WARNING! Do not hold the cutting head when you adjust the angle. The blades are sharp and you could easily cut yourself.
